19
Join a call in progress
You can use up to two system handsets at a time on an outside call. You can
buy additional expansion handsets (
CS6409
) for this telephone base. You can
register up to five handsets to the telephone base.
To join a call:
When a handset is on a call, press
/
FLASH
or on another handset.
Press
OFF/
CANCEL
to exit the call. The call continues until all handsets hang up.
Find handset
Use this feature to find all system handsets.
To start the paging tone:
Press
/FIND HANDSET
on the telephone base once
and then release when the telephone is not in use. All idle
handsets ring and their screens show
** PAGING**
.
To end the paging tone:
Press /
FIND HANDSET
on the telephone base once and
then release.
Press
/FLASH
, or any dialing key (
0
-
9
,
TONE
or
#
) on
the handset.
Place the handset in the telephone base or charger.
•
•
•
•
•
•
Do not press and hold /
FIND HANDSET
for more than four seconds. It may
lead to handset deregistration. If
1.PRESS FIND HS ON BASE 4 SEC
and
2.THEN PRESS # ON HANDSET
display alternately on the handset, refer to
Troubleshooting to register the handset to the telephone base.
When you press
OFF/
CANCEL
or
MUTE/
DELETE
on a handset, the ringer of that
handset is silenced but the paging tone continues on other handsets.
•
•
Do not press and hold /
FIND HANDSET
for more than four seconds. It may
lead to handset deregistration. If
1.PRESS FIND HS ON BASE 4 SEC
and
2.THEN PRESS # ON HANDSET
display alternately on the handset, refer to
Troubleshooting to register the handset to the telephone base.
When you press
OFF/
CANCEL
or
MUTE/
DELETE
on a handset, the ringer of that
handset is silenced but the paging tone continues on other handsets.
•
•
Telephone operation
