background image

50

FCC, ACTA and IC regulations

In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please 

contact your local telephone company.
This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment 

connected to your telephone line, ensure the connection of this equipment does not disable your alarm 

equipment. If you have questions about what will disable alarm equipment, consult your telephone 

company or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has 

been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its 

authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty.
If this equipment is causing harm to the telephone network, the telephone company may temporarily 

discontinue your telephone service. The telephone company is required to notify you before interrupting 

service. If advance notice is not practical, you will be notified as soon as possible. You will be given the 

opportunity to correct the problem and the telephone company is required to inform you of your right to 

file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, 

operation, or procedures that could affect the proper functioning of this product. The telephone company 

is required to notify you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
If this product has memory dialing locations, you may choose to store emergency telephone numbers 

(e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:
Remain on the line and briefly explain the reason for the call before hanging up.
Perform such activities in off-peak hours, such as early morning or late evening.

Industry Canada

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, 

and (2) this device must accept any interference received, including interference that may cause 

undesired operation.
Privacy of communications may not be ensured when using this phone.
The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada 

technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN is an indication of 

the maximum number of devices allowed to be connected to a telephone interface. The termination on 

an interface may consist of any combination of devices subject only to the requirement that the sum of 

the RENs of all the devices does not exceed five.
This product meets the applicable Industry Canada technical specifications. 

Appendix

Содержание CS6419





























































Отзывы: