22
The RBRC
®
seal
The RBRC
®
seal on the nickel-metal
hydride battery indicates that VTech
Communications, Inc. is voluntarily
participating in an industry program to
collect and recycle these batteries at the
end of their useful lives, when taken out
of service within the United States and
Canada.
The RBRC
®
program provides a convenient
alternative to placing used nickel-
metal hydride batteries into the trash or
municipal waste, which may be illegal in
your area.
VTech’s participation in RBRC
®
makes it
easy for you to drop off the spent battery
at local retailers participating in the RBRC
®
program or at authorized VTech product
service centers. Please call
1 (800) 8 BATTERY
®
for information on
Ni-MH battery recycling and disposal
bans/restrictions in your area. VTech’s
involvement in this program is part
of its commitment to protecting our
environment and conserving natural
resources.
RBRC
®
and 1 (800) 8 BATTERY
®
are
registered trademarks of Call2recycle, Inc.
FCC, ACTA and IC regulations
FCC Part 15
This equipment has been tested and
found to comply with the requirements
for a Class B digital device under Part 15 of
the Federal Communications Commission
(FCC) rules. These requirements are
intended to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications to this
equipment not expressly approved by the
party responsible for compliance could
void the user’s authority to operate the
equipment.
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any interference