50
Telephone operation
Console operation
To make a call using a corded headset:
Make sure a corded headset is connected to the console (page 13).
Press
HEADSET
on the console.
Wait for a dial tone, then dial the number.
To hang up, press
HEADSET.
To make a call using a cordless headset or speakerphone:
You can make a call using a registered cordless headset or speakerphone after
it is linked with an extension device. For more details, refer to the addendum
sheet that comes with the package.
On hook dialing (predialing)
Enter the telephone number. Press
DELETE
to make corrections.
Lift the handset or press
SPEAKER
to dial.
-OR-
To override automatic line selection, press
LINE 1
-
LINE 4
for the desired
line, then lift the handset.
Full-duplex speakerphone
During a call, press
SPEAKER
to switch between handsfree speakerphone
and normal handset use. Press
SPEAKER
again if you are using
speakerphone or place the handset on the console to hang up.
Answering a call
Lift the handset, or press the corresponding line key (
LINE 1
-
LINE 4
),
SPEAKER
,
HEADSET
on the console to answer an incoming call.
Temporary ringer silencing
When the console is ringing, you can temporarily silence the ringer of the
console without disconnecting the call. Press
MUTE
to silence the ringer. The
next call rings normally at the preset volume.
1.
2.
3.
1.
2.
Telephone operation
Console operation
