VTech 15500 Скачать руководство пользователя

Страница: 85 / 104

My telephone doesn’t work at all.

Make sure the power cord is securely plugged in.
Make sure you plug the battery connector securely

into the handset.
Make sure you plug the telephone line cord

securely and firmly into the telephone base and the

telephone wall jack.

Charge the battery in the handset for at least

16 hours. For optimum daily performance, return

the handset to the handset charger when not in use.
Make sure you turn the pendant on before use.
Reset the telephone base. Unplug the electrical

power. Remove the handset battery. Wait for

approximately 15 seconds, then plug the power

cord back in, and re-install the batteries. Allow up

to one minute for the handset and telephone base

to reset.
You may need to purchase a new handset battery.

I cannot get a dial tone.

Try all the suggestions above.
Move the handset closer to the telephone base. You

may have moved out of range.
If the previous suggestions do not work, disconnect

the telephone base from the telephone jack and

connect to a different phone. If there is no dial

tone on that phone either, the problem is in your

•
•

•

•
•

•

•
•

•

HELP

Содержание 15500









































































































Результаты поиска

Содержание 15500

Отзывы:

Похожие инструкции для 15500

Бренды по названию

Популярные бренды

VTech 15500, Руководство пользователя

Результаты поиска

Содержание 15500

Отзывы:

Похожие инструкции для 15500

Бренды по названию

Популярные бренды