VTech Baby 7-in-1 Grow with Baby Sensory Gym, Инструкция по эксплуатации

Страница: 6 / 16

6 6
6
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned Off .
2. Find the battery cover located on the back of the xylophone, use a
screwdriver to loosen the screw, and then open the battery cover.
3. Remove old batteries by pulling up on
one end of each battery.
4. Install 3 new AA batteries following the
diagram inside the battery box. (For best
performance, alkaline batteries or fully
charged Ni-MH rechargeable batteries
are recommended.)
5. Replace the battery cover and tighten the
screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach
of
children.
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as recommended
are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.