VTech Baby 533303, Руководство для родителей

Страница: 5 / 12

5
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned
OFF
.
2. Locate the battery cover on the back of
the unit. Use a screwdriver to loosen the
screw and remove the cover.
3. Remove old batteries by pulling up on
one end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for maximum
performance).
5. Replace the battery cover and tighten
the screw to secure the battery cover.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach
of
children.
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended
are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES:
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.
-
+