4.5 - GREEN MACHINE
™
- North America - Installation, Operation, Maintenance, & Troubleshooting Manual
Chapter 6: Testing and Startup
Page 91
TLS 450 Plus
Overfill Alarm Test, continued…
9.
Deselect the Relay #
□
that is connected to the VST Control Panel.
10.
Push the Home button to conclude the Overfill Alarm Test
6.8
Changing the Date and Time Procedure
6.8.1
Changing the Date and Time Procedure
1.
From the Main Screen, push the Date and Time soft button. This will bring up
the Date and Time Interface Screen.
See Figure 6-12
.
2.
On the Date and Time Interface Screen, insert the Date: (MM/DD/YY) then the
Time: (HH:MM:SS). Use the ARROW keys to move from left or right if a
number is not correct. The Time is a 24-hour format so 1:00 PM is set at 13:00
hours.
See Figure 6-13
.
3.
After the Date and/or Time has been set, push Return button to accept the
change(s) and return to the Main Screen.
4.
After returning to the Main Screen, check to see if the Date and Time are
correct.
Figure 6-12: Main Screen
