4.5 - GREEN MACHINE
™
- North America - Installation, Operation, Maintenance, & Troubleshooting Manual
Chapter 8: Troubleshooting
Page 146
8.7
Maintenance Switch Alarm
•
The Maintenance Switch Alarm will activate when the Maintenance
Switch has been turned OFF. The Maintenance Switch is used to stop
the GREEN MACHINE from running, which will keep power ON to the
Control Panel and to the PLC Controller.
•
This function is usually used if there is a problem with the GREEN
MACHINE and is used during troubleshooting.
•
See Figure 8-9.
When the Maintenance Switch
Alarm is Active:
1. On the Main Screen, the GM Status text box will turn RED and
display ALARM.
2. Push the Alarm Screen button to view the Alarm Screen.
3. The Maintenance Switch Alarm box will be RED and display
Maintenance Switch Alarm.
To reset the Maintenance Switch
Alarm:
1. Turn the Maintenance Switch to the ON position on the front of
the Control Panel.
2. The Maintenance Switch Alarm will now display Maintenance
Switch Normal in a GREEN box.
