Electronic switch 2A (opto)
www.VSpeak-modell.de
Page
1/4
Electronic switch 2A (opto)
Content
Page
1
Description.................................................................................................................... 1
2
Installation .................................................................................................................... 2
2.1 Electrical
Installation ..................................................................................................... 2
2.2 Mechanical
Installation.................................................................................................. 2
3
Programming................................................................................................................ 2
4
LED-Display ................................................................................................................. 3
4.1
internal green LED......................................................................................................... 3
4.2
external blue LED .......................................................................................................... 3
5
Technical data .............................................................................................................. 3
6
Accessories .................................................................................................................... 4
6.1
external blue LED .......................................................................................................... 4
6.2 Magnet ........................................................................................................................... 4
7
EG Declaration of Conformity ................................................................................... 4
8
Instructions for disposal .............................................................................................. 4
1
Description
The electronic switch (opto) is a small device without any moving parts. Therefore it is
resistant to any kind of impact and vibration. It is especially designed for the rough
environment in RC-models. Due to the flexible programmability it can be used for virtually
any application like lights, ignition, pyrotechnics, but also for functional models like tanks,
trucks and many more. It is also possible to control more than one electronic switches with
only 1 channel of your radio.
The electronic switch (opto) is controlled by a microcontroller
and galvanically isolated via
an optocoupler from the load side.
You can use a separate power source for the load. The
electronic switch (opto) switches the positive line.
The electronic switch is connected to a servo terminal on the receiver.