GPS Puck:
This is the device that receives the satellite signal that calculates your speed of travel as
well as provides the GPS waypoints (lat. & long.) for the CSV file report. Keep in mind
that areas such as underground parking may not receive signal from GPS, so these
areas may need to be sprayed in manual mode. Tall buildings can also occasionally
cause interference, but typically not severe enough to cause auto mode to stop working.
The small round magnetic puck in the image below is your GPS Puck.
Total Control Remote:
The signal receiver for the 2.4ghz total control remote can be seen next to the gps puck
in the image above. The remote controls all of the same functions as your VSI Spray
App does, but for those that have ridgid mounted phones or tablets in your trucks, the
remote is a nice backup option for operating lights, strobes, throttle, choke, etc.. from
outside of your truck without removing the phone or tablet. The total control remote is
pictured below. It can be charged with a basic mini usb cable. This is only included
when you purchase the Total Control upgrade.
