VS Sassoon Pro-50 intensive VS955A, Руководство пользователя, Страница: 4 / 12

INSTRUCTIONS FOR USE
IMPORTANT INFORMATION REGARDING THE NI-MH BATTERIES OF THIS UNIT
To obtain and maintain the longest battery autonomy possible,
allow it to charge for 16 hours before using it for the first time and
then approximately every three months. Full autonomy of the unit
will only be obtained after three complete recharge cycles.
Charging the clipper
1. Plug the cord into the unit and connect the adaptor. Before using
the clipper for the first time, allow it to charge for 16 hours. Make
sure the clipper’s switch is in the OFF position.
2. Check that the charging indicator light is lit.
3. A full charge provides up to 40 minutes of use of the clipper.
4. Subsequent charges should also be 16 hours .
Mains use
Connect the adaptor into the mains, wait 1 minute and then switch
into the ON position.
IMPORTANT ! Use only the adaptor provided with the clipper.
Oiling Instructions
IMPORTANT! It is highly recommended before each use to oil
the blades with the oil provided. This ensures optimum cutting
performance.
For the first use you will need to use the oil supplied with the
product, unscrew the cap and cut off the very end of the plastic
tube with a pair of scissors to release the oil.
To oil the blades ensure the unit is switched on. Gently squeeze the
oil tube and apply 2 drops of oil onto the blades. Leave the unit on
for a further few seconds to allow the oil to thoroughly spread the
length of the blades. Switch off the unit and remove any excess oil
by gently dabbing with a cloth.