VRmagic Eyesi, Инструкция по установке и эксплуатации, Страница: 55 / 80

7 Cleaning, Maintenance, and Disposal
7.1 Cleaning Instructions
WARNING
Electrical shock hazard if water enters the simulator
components
If water enters any of the simulator components, there is the risk of death or
serious injury through electrical shock. Further, the simulator might get dam-
aged through short circuits and resulting heat.
f
Make sure that water does not enter any of the simulator components.
f
Disconnect all simulator components from power before attempting to
clean them with a damp cloth.
f
Make sure that the simulator does not get wet while cleaning surrounding
areas (e.g. while wet mopping the floor).
Just like regular PC hardware, the simulator requires no ongoing cleaning. If, never-
theless, cleaning is required, observe the following instructions.
• Do not use solvents. They can damage lacquer finishes and plastic parts or
make them brittle.
• Do not use sharp-edged or potentially scratching objects or other tools to clean
the device. Especially the touch-sensitive surface of the touch screen can be
severely damaged.
• Dust off all surfaces using only a soft, lint-free towel whenever necessary.
• To clean more heavily soiled areas, use a slightly damp (not wet), soft towel. If
necessary, use a mild household cleaner.
• Do not clean the felt that covers the eye openings of the surgical interface heads.
7.2 Maintenance
The simulator requires no regular maintenance.
55
Cleaning, Maintenance, and Disposal
Eyesi Surgical Simulator – Installation and Operating Guide