VREDO DZ 208.035, Руководство оператора

Страница: 8 / 36

HL_DZ-SUPERcompact_10-2017_03_EN 8
2. Safety requirements
Replace all warning indications on the tank that are damaged or unreadable (see chapter 7), and keep all
stickers with safety requirements free of mud and contamination.
Check, and repair if needed, the function of all lights on the machine before entering public roads.
Get out ignition key from driving vehicle before attempting any service to the overseeder and observe the
instructions in this manual.
Fit the supports to the frame and lock them with the safety pins or set the 3-point linkage in lowest position
or block it by props or hang it by chains or hoisting belt.
For trailed machines with hydraulic drawbar and wheel set, ensure that the mechanical locking devices are
in place before attempting any work underneath (photo 7 no. 6).
Before hitching off the machine, ensure that the support stands are in place (photo 1 no. 1).
WARNING! The discs are very sharp.