VPixx Technologies VideoBahn TRACKPixx3, Руководство по установке, Страница: 19 / 22

17
TRACKPixx3 Installation Guide
Console Monitor and Stimulus Display power connections
Use the appropriate power cables to connect the console monitor and the Stimulus display.
Chinrest installation
If your TRACKPixx3 package includes the optional chinrest, install it at a proper distance from the TRACKPixx3 camera
according to the setup diagram appropriate to your experiment (Figure 2 or Figure 3).
TRACKPixx3 camera rear LED
To the rear of your TRACKPixx3 camera is a status LED which, under normal operation will be ORANGE. After power up, a
short delay during which the LED will be RED signifies that the camera is in initialization mode.
Figure 11 - TRACKPixx3 camera rear LED
Software installation instructions
For information on how to install your software, please refer to the
Application Guide for VPixx Products
Rear status LED