VPG TruckWeigh, Руководство по установке, настройке и калибровке

Страница: 85 / 130

85
Setting set point alarms
1. Tap the scroll up or scroll down buttons to highlight the set point alarms menu
2. Tap the select button to open the set point alarms menu
3. Tap the scroll up or scroll down buttons to highlight a set point alarm
4. Tap the select button to select a set point alarm
5. Use the cycle, scroll and select buttons to input the weight that will trigger the set point alarm
6. Tap the back button to return to the set point alarms menu
7. Repeat steps 3 to 6 to set the weights for each set point alarm
8. Tap the back button to return to the alarms menu
Axle underload alarm
Axle underload can occur when a load over the rear of the vehicle causes the steering axles at the front
to raise and lose traction. This is usually set on the first junction box on the vehicle.
The axle underload alarm can be triggered when the weight on the front axles is less than a percentage
of the current gross weight of the vehicle.
A G
A G
A G
A G
Alarms On/Off
Alarm Weights
Set Point Alarms
Axle Underload
Alarms
A G
A G
A G
A G
Set Point 1: 0
Set Point 2: 0
Set Point 3: 0
Set Point Alarms
TruckWeigh
®
TruckWeigh®