VTAC USER MANUAL
VPC
10/10/2022
For more information visit vpc.com
3
Figure A. Rear side/ wiring exit side.
INDICATES 5 POSITIONS
Figure B. Side view.
FRONT
(MATING)
SIDE
REAR
SIDE
Figure C. Front view (mating side).
POSITION A1
INDICATOR
TOP
BOTTOM
MOUNTING SCREW (2 PLACES)
EXTRACTION TOOL CAVITY
SIM Receiver Module.
1.
The top of the SIM Receiver Module can be identified by the position A1 indicator,
located on the front side and is marked with a notch(
Figure C
).
When the module is
oriented correctly, this notch is located in the upper left corner of the front side.
2.
The front is the mating side of the module and is also where the extraction tool
cavities are located (
Figure C
).
3.
The rear side can be identified as the side with the labeling closest to the edge from
the side view. The rear side is the side where wiring exits. (
Figure B
).
4.
Blue and white markings along the slot edges denote slot (insert) count. Each blue
or white marked area indicate 5 slot positions. (
Figure A
).
SIM MODULE FEATURE IDENTIFICATION- RECEIVER
PART # 510 170 101