9050 USER MANUAL
VPC
07/19/2022
For more information visit vpc.com
12
8-32 x .625" PLATFORM
MOUNTING SCREWS
9050TR PLATFORM REMOVAL AND REINSTALLATION
PART # 310 104 369
TOOLS REQUIRED
5
/
32
Ball End Allen Wrench or Ball Driver
Phillips Head Screwdriver
Zip Ties
REMOVAL
1.
Secure receiver to rack using the captive 10-32 mounting screws
(
Figure A
). The platform should only be removed from the receiver
after the receiver has been secured to the rack.
2.
Remove any optional accessories including keyboard tray, leg kit, and
instrument bracket.
3.
With the receiver secured to the rack, remove the six 8-32 mounting
screws from the bottom of the 9050TR to remove the platform (
Figure
B
).
4.
Remove the 8-32 screws that attach the platform brackets to the
slides. The platform will now be free from the receiver and slides. The
platform brackets do not need to be removed from the platform for
transportation.
5.
To secure the slides for transport, return the slides to the closed
position and use zip ties to secure the 3 sections of each slide.
Figure A.
Figure B.
The six mounting screws must be removed from the receiver
before the platform can be removed.
Figure C. The brackets will be securely attached to the slides after the mounting
screws are installed.
REINSTALLATION
1.
Remove the zip ties used to secure the slides.
2.
Attach the platform with brackets to the slides using six 8-32
mounting screws (
Figure C
).
3.
Slide the platform to the closed position and install the
six 8-32 mounting screws to re-attach the platform to the
receiver.
4.
Reinstall any of the optional accessories.
5.
Once the platform has been re-attached to the receiver
and slides, detach the receiver from rack by unscrewing the
captive 10-32 mounting screws.
Platform removal is recommended for safe transport should the rack
need to be moved or relocated.
