WVRXCAM1
Package includes a Receiver Box, one rear color camera, stainless steel hardware,
and non-corrosive camera mounting bracket.
1. Camera and receiver must be connected to 12 Volt DC power supply.
- Check 12VDC power at camera and
receiver box.
3. Press and hold the “pair” button on the receiver for 3 seconds
and release. (Monitor will display “Please press TX pairing button”)
Notice: The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to the
antenna or the device could result in the device exceeding the RF
exposure requirements and void user’s authority to operate the device.
MA2A1110001-1R
P
AIRING
P
ROCESS
T
ROUBLE
S
HOOTING
Easy installation, fits most applications
VWM12
/
12
/
11
