3
2019 Voxx Electronics Corporation. All rights reserved.
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press the button. The
parking lights will flash one (1) time, indicating the system is armed, has locked the
doors (if equipped and connected) and activated the starter disable feature. The LED
status indicator will blink steadily, once per second.
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the
system requires a second press of the button to activate an audible arming response
from the vehicle.
*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more
than 3 seconds.
Using Your Remote Control
Two Stage Door Unlock (Optional)
If this feature is enabled on your system, pressing the button one (1) time will unlock
only the driver’s door. Press again within three (3) seconds to unlock the remaining
doors.
Disarming the Security System
To disarm the system press the
button. The parking lights will flash two (2) times,
indicating the system is disarmed and has unlocked the doors (if equipped and
connected).
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the
system requires a second press of the button to activate an audible disarming
response from the vehicle. If your system is set up for 2 stage unlock, a third press of
unlock will activate the audible response.
Activating the Trunk Release Feature (Optional)
If this feature is enabled on your system, pressing and holding the
button for three
(3) seconds will open the vehicle’s trunk or hatch.
Activating the AUX 1-4 Output (Optional)
AUX channel output is an optional feature and programming is required at the time of
installation. Please consult your dealer for more information.
Using the Personal Protection Alarm (Panic)
Press and hold the
or
button for three (3) seconds to activate the personal
protection alarm. During panic mode, the normal function of the transmitter buttons
will be suspended. The transmitter’s
and
buttons can be used to lock and unlock
the door (if the option is installed). To stop the alarm, press and hold the
or button
on the transmitter again for three (3) seconds. The system will automatically stop after
thirty (30) seconds.
