Product Description
This camera design integrates a backup camera with vehicle bumper
or license plate. The camera is easy to mount on your car, truck, or van
but ALWAYS CHECK AND DOUBLE CHECK before drilling or mounting
any item on the vehicle. Make sure there are no obstructions in front
of the camera, behind where mounting the camera, and that the wire
can be run without pinching or interfering with any other item.
This Wired Camera is compatible with most monitor/TFT screens and
can be connected using a standard RCA connector. If an extension
lead is required be sure to use a Video cable with RCA type ends. An
Audio cable will cause poor picture quality.
This camera is equipt Dynamic Parking Lines. When the camera
detects the motion of the vehicle, the parking lines on the image will
bend to display the trajectory of the vehicle.
Note: The parking lines will only move while the vehicle is in motion.
Mounting Location
