Voxson Voxtrack GPS850, Быстрый старт

Страница: 7 / 26

Voxtrack GPS850 Quick Start Guide
7
Installing the GPS850 in your car
Please note that the device must be mounted in the vehicle such that is does not interfere with
the driver’s view or operation of the vehicle’s controls. The device must also not be mounted in
the deployment area of the vehicle’s airbags (if fitted). This device must be installed in
accordance with all applicable local laws.
Item Description
1 Cradle Tabs Used to connect cradle to suction mount bracket.
2 Left-Right Adjustment
Screw
Loosen to allow left and right angle adjustment of
suction mount bracket. Tighten once angle is correct.
3 Up-Down Adjustment
Screw
Loosen to allow up and down angle adjustment of
suction mount bracket. Tighten once angle is correct.
4 Suction Mount Lever Use to fix / release the suction mount from the
windscreen.
5 Suction Cup Mounts against windscreen. Ensure both suction cup
and windscreen are clean before mounting.
6 Cradle Holds the GPS850 device. Connects to bracket via the
tabs.
7 Dash Mounting Plate For use when windscreen mounting is not an option.
Adhesive sticks the plate to the dashboard then suction
cup can be mounted to the plate.
1. To assemble your car holder kit first attach the cradle to the suction-mount bracket. To
complete this start by orientating the bracket such that the lever at the base is facing
downwards. Place the cradle onto the bracket ensuring that the two tabs on the bracket
align with the holes in the cradle. Slide the cradle downwards until it is securely in place.
2. Place the car holder kit in a suitable location on your windscreen ensuring that the lever
at the base of the bracket is switched such that it is away from the glass. The area of the
windscreen where the bracket is to be mounted should be cleaned with an alcohol based
cleaner prior to attaching the bracket. The best location for the device is usually at the
bottom of the windscreen in the centre of the vehicle.
3. Whilst firmly pressing the bracket against the glass, push the lever back into place
against the base of the bracket. Once fitted, pull gently on the bracket to check that the
suction mount is secure.
CAUTION: Do not place any force on the cradle itself as it can be easily broken.
o
n
q
s
r
p
t