VOX electronics WK-1622-1, Инструкция по эксплуатации

Страница: 3 / 52

3
8. Do not operate or place any part of this appliance on or near hot surfaces (such as gas or electric burner
or in a heated oven).
9. Do not let the cord hang over the edge of a table or a counter. Do not let the cord touch hot surface.
10. Never yank on the cord as this may damage the cord and eventually cause a risk of electric shock.
11. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly
qualified person in order to avoid a hazard.
12. Avoid touching the surface of the hot kettle, use the handle and knobs.
13. To avoid possible steam damage, not face the spout when operating the kettle.
14. If operated on wood furniture, use a protective pad to prevent damage to delicate finishes.
15. To avoid scalding, always ensure the lid is correctly positioned before operation.
16. Scalding may occur if the lid is removed while heating.
17. Carefully open the lid when it is hot.
18. Extreme caution must be used when moving the kettle containing hot water. Never lift the kettle by its lid.
Always use the body handle.
19. Do not switch your kettle on if it is empty.
20. To protect from electrical hazard, do not immerse the kettle, power base or cord set in any liquid.
21. The kettle is only to be used with the stand provided.
22. To protect against fire, do not operated in the presence of explosive and/or flammable fumes.
23. The appliance must not be immersed in water.
24. This product is not designed for any other uses other than those specified in this booklet.
25. This appliance is intended to be used in household only.
26. Save these instructions for further reference.
27. Never let the kettle operate while unattended.
28. Switch off the power supply and disconnect from mains supply when not in use, before cleaning or other
maintenance.
29. Never touch the hot parts of the appliance.
30. Steam will cause burn. Be careful when opening the lid with hot water.
31. Always turn off and unplug the kettle when it is not in use.
32. Avoid using an extension cord, extension cord may cause risk of fire because of overheat.
4. Before first use
Before first use, fill the kettle with clean water to maximum capacity and boil. Discard the water and repeat
the process.
5. Operation
1. The kettle should always be unplugged when filling or adding water.
2. Fill the kettle with water to desired level. Do not overfill or there will be a risk of spillage or spitting. The
water level indicator will assist you to measure the correct amount. You can fill the kettle via the spout or
after opening the lid. Do not forget to close the lid after filling; otherwise the kettle will not automatically
switch off after use.
3. Do not fill with more than 1.5 litres of water
˄
to “max” indication
˅
.
4. An automatic safety cut-out has been fitted for protection against overheating; it will operate if the kettle is
switched on when containing insufficient water. Always ensure the water inside the kettle covers the