Vortice VORTRONIC 35 RF, Инструкция пользователя

Страница: 6 / 20

ENGLISH
• Do not use this appliance for any other application than
stated in this booklet.
• After removing the appliance from its packing, make
sure that it is intact: if in doubt consult a qualified
professional. Do not leave packaging materials within
the reach of children.
• Do not sit on the unit.
• As with any electrically-operated units you must
observe the following basic rules when handling your
product:
- do not touch it if your hands are wet or damp;
- do not touch it if you are barefoot;
- do not let it be used by children.
• Do not operate the appliance in the presence of strong
chemicals, inflammable vapours (alcohol, insecticides,
petrol, etc.).
• To permanently remove the equipment, turn the switch
off and disconnect the supply cable from the socket
then dispose of safely.
• Do not introduce fingers or objects through the air
grilles.
• Do not use the device while bathing or having a
shower.
• Do not touch the inner part of the device when it is
plugged in.
• Before opening the unit to perform any cleaning or
maintenance operations whatsoever, disconnect the unit
from the mains.
Caution:
this symbol indicates that care must be taken to avoid injury
!
6
• Do not make any modifications of any kind to your
product.
• The appliance must not be exposed to atmospheric
conditions (rain, sun, etc.).
• Do not place any objects on the unit.
• Follow the manufacturer’s instructions if the device is
placed in a vertical position.
• Perform periodic inspection on the unit to see that it is
free of visual defects. If any are found, do not operate
the unit and immediately contact Vortice.
• The electrical mains to which the unit is connected
must conform to current standard.
• The appliance must be earthed. If in doubt, have the
wiring checked by a qualified person.
• The electrical power source to which the product is to
be connected must be able to provide the maximum
amount of electrical power required by the product. If it
cannot do this, contact an electrician for appropriate
remedial action.
• If the appliance’s plug is not compatible with the socket,
have a professionally qualified person replace the plug.
Overall, no adapters, multiple plug units and/or
extension leads should be used, especially in
bathrooms. If they are used, make sure they conform to
the existing safety regulations and that the maximum
allowed current and power are not exceeded.
• Do not pull on the electrical cord. Do not place the cord
near a source of heat, and avoid serious overheating
by always wind it up completely. If it should be
damaged, contact Vortice.
• Do not place any tools or materials on the electrical
cord.
• Do not cover or obstruct the unit’s air intake and outlet
grilles.
• Should the appliance be dropped or suffer a heavy
blow, have it checked immediately by a qualified
engineer.
• Should the appliance fail to operate or not operate
correctly, turn the switch to off. Contact Vortice
immediately and, if repairs are required, make sure
that original Vortice parts are used.
• Do not leave the appliance on unnecessarily: when the
appliance is not in use, turn the switch to off.
• It is not advisable to use the device near sources of
heat,electric heaters, fireplaces etc.
• The device does not replace any kitchen exhaust fan.
• Place the device at least 1 metre from large metal
bodies (radiators, steel cabinets) and from televisions,
Hi-Fi , computers etc. to avoid interference.
• During the operation the device emits a very low
quantity of ozone which does not exceed the limits
established by regulations.
• The device does not eliminate carbon monoxide.
• The device should not be used in the open air or in
greenhouses.
FOR GOOD OPERATION
• It is advisable to switch on the device when polluting
substances mix with the room air (cigarette smoke ,
different odours).
• The device should be used with all the available filters.
• The operation of the device is based on the air
recycling and a purification system, therefore, keep
doors and windows closed while using it.
Precaution:
this symbol indicates that care must be taken to avoid damaging your product
!
The power-source data must be consistent with
the electrical data shown on the nameplate A.