INCLUDED:
a. Adapter Post
b. Threaded Stud
c. 1.3mm Allen Wrench
d. 2.0mm Allen Wrench
INSTRUCTIONS:
1.
Remove cap covering the binocular tripod adapter socket.
2.
Insert the threaded stud into the binocular tripod adapter
socket and tighten using the 2.0mm Allen wrench.
DO NOT OVERTIGHTEN.
3.
Using the 1.3mm Allen wrench, tighten the set screw in
the threaded stud.
DO NOT OVERTIGHTEN.
4.
Attach adapter post to the tripod plate utilizing the
tripod’s 1/4-20 mount.
5.
Mount the binoculars to the tripod by inserting the
threaded stud into the adapter post. Tighten by hand
using the locking knob until secure.
a.
c.
d.
b.
