DP/N: 007127v1.1, 2012-02-21
© 2012 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured.
7
3.
FPVB WIRING , CONT’D
G.
Route the wire and vacuum tubing under the rear
seat and along the existing wiring harness.
Secure the wires to the existing harness. (See Fig
3-d)
H.
On the driver's side of the vehicle, locate the OEM
Fuel Pump Control Module.
I.
Strip back the split loom and the tape, exposing
the wires.
J.
Locate the violet with a green/blue tracer wire.
(See Fig 3-f 3-e)
K.
See wiring schematic Fig 3-g
Fig. 3-d
Fig. 3-e
Fig. 3-f
NOTE:
Automatic vehicles may have an orange
with a red tracer.