10
English
Before initial use, you must soak the Mineral Cartridge in water for 24 hours. You
may use a separate container or Water Tank to do so. If Tank is used, empty water
and refill with fresh water prior to use.
Note:
Spills can occur during cleaning, moving or refilling the Water Tank, so be
careful to avoid spills when doing these activities.
1.
Unplug humidifier and place on a level surface.
Note: The unit may take several minutes to create mist with the initial use of a new
Mineral Cartridge.
2.
Remove Water Tank from the base by grasping the top integrated handle
and pulling up towards you (A).
CAUTION: When removing Water Tank lift
vertically, do not twist tank while still in base or Cap may disengage and
leak.
3.
Turn the Water Tank upside down and remove the Cap by turning it
counterclockwise (B).
4.
Gently place Water Tank on a flat surface and fill with cool tap water.
5.
Ensure Gasket, the rubber ring around the Water Tank, is properly positioned.
Insert the Cap into the grooves of the tank and turn clockwise until tightened.
When Cap is fully tightened the arrows on the tank will align with the indicator
lines on the Cap (C).
6.
Lower Water Tank into Base, positioning Water Tank around the ledge for secure
placement (D). Once in nested position, water outlet valve inside Cap opens,
releasing water into Base.
Note: The rate of water dispensing from Water Tank into Base is controlled by the
Mineral Cartridge. The unit may take several minutes to fill the Base.
FILLING WATER TANK
C
A
B
D
Gasket Ring
