34 / 64
7
Phone Settings
7.1
Adjust Audio Volume
When the device is in the default standby mode
Set the volume mode in volume select key. (Ringtone size, headphone volume and headphone MIC
gain)
Set the volume in Lower volume and Increase volume.
7.2
Set Ring Tone Volume and Type
When the device is in the default standby mode
Press soft-button [Menu] till you find the [Settings] item.
Enter [Settings] item till you find the [Basic Settings] item.
Enter [Basic Settings] item till you find [Ring Settings] item.
Enter [Ring Settings] item and you will find [Ring Volume] and [Ring Type] item.
Enter [Ring Volume] item and you find [Headset Volume] and [Handsfree Volume] item.
Enter [Headset Volume] or [Handsfree Volume] item, press left / right navigation keys to adjust
the ring volume.
Save the adjustment by pressing [save] button when done.
Enter [Ring Type] item, press left / right navigation keys to change the ring type.
Save the adjustment by pressing [save] button when done.
7.3
Adjust LCD Energy Saving
When the device is in the default standby mode.
Press soft-button [Menu] till you find the [Settings] item.
Enter [Settings] item till you find the [Basic Settings] item.
Enter [Basic Settings] item till you find [Screen Settings] item.
Enter [Screen Settings] item till you find [Energysaving] item.
Enter [Energysaving] item, press Left / Right navigation keys to adjust the LCD Energysaving mode.
If select ‘Enabled’, browse the setting parameters with up/down navigation keys and enter required
information. When done, press [Save] / [OK] button to save the changes.
The default Energysaving time is 30 seconds.