Vonsch Quatrofrem Series, Конфигурация и диагностика

Страница: 21 / 180

UNIFREM v.3.41x
10 May 2017 Page 21 from 180
Name [ID] Description Dim.
□ LB4 LB4 status
□ LB5 LB5 status
□ LB6 LB6 status
□ LB7 LB7 status
□ LB8 LB8 status
Numerical blocks
Group of parameters number [312]
Output of numerical blocks.
MENU \ DIAGNOSTICS \ FUNCTIONS \ PLC FUNCTION \ NUMERICAL BLOCKS
Name [ID] Description Dim.
NB1 [1274] Result of operation of the first numerical block.
NB2 [1275] Result of operation of the second numerical block.
NB3 [1276] Result of operation of the third numerical block.
NB4 [1277] Result of operation of the fourth numerical block.
4.4.2 Limit switches
Group of parameters number [890]
States and tracks of the limit switches.
MENU \ DIAGNOSTICS \ FUNCTIONS \ LIMIT SWITCHES
Name [ID] Description Dim.
LS [919] Limit switch state.
□ LS1 LS1 inactive/active.
□ LS2 LS2 inactive/active.
□ LS3 LS3 inactive/active.
□ LS4 LS4 inactive/active.
□ Slows down F>0 Slow down in effect for positive frequency.
□ Slows down F<0 Slow down in effect for negative frequency.
LS1 Track [891] Number of meters run during the activated limit switch function. m
LS1 Track in km [929] Number of kilometers run during the activated limit switch function. km
LS2 Track [892] Number of meters run during the activated limit switch function. m
LS2 Track in km [930] Number of kilometers run during the activated limit switch function. km
LS3 Track [893] Number of meters run during the activated limit switch function. m
LS3 Track in km [931] Number of kilometers run during the activated limit switch function. km
LS4 Track [894] Number of meters run during the activated limit switch function. m
LS4 Track in km [932] Number of kilometers run during the activated limit switch function. km
4.4.3 Process controller
Group of parameters number [18]
Diagnostic group of the process controller quantities.
MENU \ DIAGNOSTICS \ FUNCTIONS \ PROCESS CONTROLLER
Name [ID] Description Dim.
Setpoint PC [21] Setpoint value of the process controller. %
Feedback PC
[409]
Feedback value of the process controller. If the process controller is turned on and
works correctly, the value is near the value Setpoint value [407] (page 98).
%
Error PC [410] Regulation error of the process controller. In steady-state, it should be close to 0. %
Output PC [64] Action value (output) of the process controller.
State PC [820] Actual state of the process controller.
□ Lower
saturation
Process controller operates at lower saturation.
□ Upper Process controller operates at upper saturation.