Volvo XC60 Twin Engine 2020, Руководство пользователя

Страница: 479 / 714

STARTING AND DRIVING
}}
* Option/accessory. 477
Adjusting the setting for damping
Polestar Engineered
*
It is possible to adjust the settings of the
shock absorbers for driving under other con-
ditions or on specific road surfaces.
Location of adjuster knobs
There are four adjuster knobs, two for the front
shock absorbers and two for the rear. The
adjuster knobs are located above each wheel.
For the front wheels, the adjuster knobs are
located under the bonnet. For the rear wheels,
the adjuster knobs are located above each
wheel in the wheel housing.
Location of adjuster knob, front wheel.
Location of adjuster knob, rear wheel.
NOTE
There is a total of 22 adjustment positions
for each adjuster knob. The closer to 0 for
the adjuster knob, the harder the shock
absorption.
Adjusting the setting for damping,
front
Make sure that the adjuster knob is set to 0
position before starting the adjustment. This
way it is easier to know which adjustment
position is set.
Turn the adjuster knob clockwise and anticlockwise
respectively to change adjustment position.
Turn the control clockwise until it has
stopped in order to access adjustment
position 0.
Turn the control anticlockwise to select
the desired adjustment position.
> Then carry out the same procedure for
the other tyre.
Adjusting the setting for damping, rear
The rear adjuster knobs are located above the
tyre inside the wheel housing. The car must be
raised on a jack to access the rear adjuster
knobs, see separate section.