Volvo XC60 Twin Engine 2020, Руководство пользователя

Страница: 464 / 714

||
STARTING AND DRIVING
462
Driver display when changing gear with steering
wheel paddles.
Driver display when changing gear with steering
wheel paddles in manual gearshift mode.
Switch
To change gear one step:
–
Pull one of the paddles backwards -
towards the steering wheel - and release.
A gear change occurs at each pull of the pad-
dle provided that the engine speed does not
leave the permitted range. After each gear
change the figure in the driver display changes
to show the current gear.
Deactivating the function
Manual deactivation in gear position D and
B
–
Deactivate the steering wheel paddles by
pulling the right-hand paddle (
+ ) toward
the steering wheel and holding in place
until the figure in the driver display for the
current gear extinguishes.
> The gearbox returns to gear position
D
and B depending on the position
selected before the paddles were acti-
vated.
Automatic deactivation
In gear position D the steering wheel paddles
are deactivated after a short time if they are
not used. This is indicated by means of the fig-
ure for the current gear extinguishing.
In gear position B there is no automatic deac-
tivation.
Related information
•
Automatic gearbox (p. 458)
•
Gear positions for automatic gearbox
(p. 459)
•
Gear shift indicator (p. 463)
Gear selector inhibitor
The gear selector inhibitor prevents acciden-
tal changing between different gear positions
in an automatic gearbox.
Automatic gear selector inhibitor
The automatic gear selector inhibitor has spe-
cial safety systems.
From park position - P
To be able to move the gear selector from the
P position to another gear position, the brake
pedal must be depressed and the ignition
position must be
II .
From neutral position - N
If the gear selector is in the N position and the
car has been stationary for at least 3 seconds
(irrespective of whether the engine is running)
then the gear selector is locked.
To be able to move the gear selector from the
N position to another gear position, the brake
pedal must be depressed and the ignition
position must be
II .
Message in the driver display
If the gear selector is inhibited, a message is
shown in the driver display, e.g.
Gear lever
Press brake pedal to activate gear lever .
The gear selector is not inhibited mechanically.