Volvo XC60 Twin Engine 2020, Руководство пользователя

Страница: 157 / 714

LIGHTING
}}
* Option/accessory. 155
Active bending lights
*
Active bending lights are designed to provide
additional illumination in bends and junctions.
Cars with LED
5
headlamps
*
can have active
bending lights, depending on the car's equip-
ment level.
Headlamp pattern with function deactivated (left)
and activated (right) respectively.
Active bending lights follow steering wheel
movements to provide additional illumination
in bends and junctions and can thereby pro-
vide the driver with improved visibility.
The function is activated automatically when
the car is started. In the event of a fault in the
function, the
symbol illuminates in the
driver display at the same time as the driver
display shows an explanatory text.
The function is only active in weak daylight or
darkness and only when the car is moving and
dipped beam is switched on.
Deactivating/activating the function
The function is activated when the car is sup-
plied from the factory and can be deactivated/
activated via the centre display's function
view.
Press the
Active Bending
Lights button.
Related information
•
Adjusting light functions via the centre
display (p. 149)
Rear fog lamp
The rear fog lamp is considerably stronger
than the normal rear lights and should only be
used in reduced visibility due to fog, snow,
smoke or dust so that other road users have
an early warning of a vehicle ahead.
Button for rear fog lamp.
The rear fog lamp is a lamp at the rear of the
car, on the driver's side.
The rear fog lamp can only be switched on
when ignition position
II is active and the
rotating ring on the stalk switch is in position
or .
Press the button to switch the lights on/off.
The
symbol in the driver display illumi-
nates when the rear fog lamp is switched on.
5 LED (Light Emitting Diode)