Volvo V 90 Cross Country, Руководство пользователя

Страница: 125 / 594

INSTRUMENTS AND CONTROLS
}}
* Option/accessory. 123
3. Within three seconds, depress the 1 or 2
button.
> When the position has been stored in the
selected memory button an acoustic sig-
nal sounds and the light indicator in the
M
button extinguishes.
If none of the memory buttons is depressed
within three seconds then the
M button extin-
guishes and no storing takes place.
The seat must be adjusted again before a new
memory can be set.
Using a stored setting
A stored setting can be used with the front door
either open or closed:
Open front door
–
Depress one of the memory buttons 1 or 2
with a short press. Seat, door mirrors and
head-up display move and then stop at the
positions stored in the selected memory but-
ton.
Closed front door
– Hold one of the memory buttons 1 or 2
depressed until seat, door mirrors and head-
up display stop in the positions that are
stored in the selected memory button.
If the memory button is released, the movement
of the seat, door mirrors and head-up display will
be stopped.
WARNING
Risk of crushing! Make sure that children do
not play with the keypad. Check that there are
no objects in front of, behind or under the
seat during adjustment. Make sure that none
of the passengers in the rear seat is in danger
of becoming trapped.
Related information
•
Power front seat
*
(p. 121)
•
Adjusting the power front seat * (p. 122)
Multi-functional front seat
*
Enhance the seating comfort using the multi-
function control.
Multi-function control, located on the side of the seat's
seating section.
The multi-function control can, in some variants,
be used to adjust the lumbar support
*
, side sup-
port
*
, cushion length and massage settings
*
. Set-
tings made with the multi-function control are
shown in the centre display
* . Certain function
selections can also be made directly in the centre
display.
Centre display
The driver and the passenger seat settings that
are made with the multi-function control are
shown in the centre display. If the settings for
only one of the front seats are shown in the cen-
tre display, the settings are positioned centred in