Volvo SDLG LG956L Скачать руководство пользователя страница 22

Страница: 22 / 130

Operation & Maintenance Manual

──

LG956L Wheel Loader

2.3 Protective Items

Wear protective items, such as helmet made of hard

materials, safety glasses, shoes, mask reflector

protective vest, earplugs, heavy gloves when the

machine is in operation or being maintained.

Make sure to wear a helmet made of hard materials, safety glasses and heavy gloves if there are

scattered metal chips or other minute particles in the operation, particularly when cleaning the

filter elements of the air cleaner with compressed air, and be sure that there is no one near the

machine.

Never wear loose clothing, jewelry and loose long

hair. They can be caught by control levers (or control

handles) or moving parts, which may cause serious

injury and even death.

Avoid wearing oily clothes because they are

flammable.

Compressed air may hurt the body. When using compressed air, be sure to wear a mask, safety

cloth and shoes. The pressure of compressed air should be lower than 0.3MPa.

All the protective items should be routinely examined for proper function before use.

2.4 Unauthorized Modification

Any modification without the company authorization may result in serious personal danger.

Please consult Shandong Lingong Construction Machinery Co. Ltd or the sellers before making

modifications.

The company assumes no responsibility for any injury or damage caused by unauthorized

modifications.

Содержание SDLG LG956L



































































































































Результаты поиска

Содержание SDLG LG956L

Отзывы:

Похожие инструкции для SDLG LG956L

Бренды по названию

Популярные бренды

Volvo SDLG LG956L, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SDLG LG956L

Отзывы:

Похожие инструкции для SDLG LG956L

Бренды по названию

Популярные бренды