Volvo S90 - ACCESSORY PANEL, Дополнение к руководству пользователя

Страница: 117 / 166

PRACTICAL INFORMATION
}}
* Option/accessory. 115
6. Turn off the compressor (press the on/off
switch to position
0
) when the correct infla-
tion pressure has been reached.
CAUTION
•
After inflating the tires, always reinstall the
valve cap to help avoid damage to the
valve from dirt, gravel, etc.
•
Use plastic valve caps only. Metal caps
could corrode and become difficult to
remove.
7. Disconnect the electrical wire from the 12-
volt socket.
Related information
•
Checking tire inflation pressure (p. 97)
•
Tire sealing system (p. 108)
Electrical sockets
There are two 12-volt sockets in the tunnel con-
sole and one 12-volt socket in the trunk
*
.
12-volt socket in the tunnel console
12-volt socket in the tunnel console for the front seats
12-volt socket in the tunnel console for the rear seats
(two USB sockets are also provided)
The electrical sockets can be used for 12-volt
devices such as monitors, MP3 players and cell
phones. For the sockets to provide electrical cur-
rent, the ignition must be in at least mode
I
.
WARNING
Always keep the sockets covered when not in
use.
CAUTION
Max. current provided is 10 A (120 W) if one
socket is used at a time. If both of the sock-
ets in the tunnel console are used at the
same time, the max. current provided per
socket is 7.5 A (90 W)
If a tire sealing system's compressor is being
used, no other device should be connected to
any of the other sockets while the compres-
sor is operating.