Volvo S60 Twin Engine 2020, Руководство пользователя

Страница: 404 / 687

STARTING AND DRIVING
* Option/accessory. 402
Starting the vehicle
The vehicle can be started using the start
knob in the tunnel console when the remote
key is in the passenger compartment.
Start knob in the tunnel console.
WARNING
Before starting:
•
Buckle your seat belt.
•
Adjust the seat, steering wheel and
mirrors.
•
Make sure you can fully depress the
brake pedal.
The remote key is not physically used to start
the ignition because the vehicle is equipped
with the keyless Passive Start system.
To start the vehicle:
CAUTION
The vehicle cannot be started if the charg-
ing cable is still plugged in. Make sure to
pull out the charging cable from the charg-
ing socket before starting the vehicle.
1. The remote key must be inside the vehicle.
For vehicles with Passive Start, the key
must be in the front section of the passen-
ger compartment. With the optional key-
less locking/unlocking function
*
, the key
can be anywhere in the vehicle.
2. Press and hold down the brake pedal
1
as
far as possible.
3. Turn the start knob clockwise and release.
The control will automatically return to the
original position.
WARNING
•
Never use more than one inlay mat at a
time on the driver's floor. If any other
type of floor mat is used, remove the
original mat from the driver's seat floor
before driving. All types of mats must
be securely anchored in the attach-
ment points in the floor. Make sure the
floor mat does not impede the move-
ment of the brake pedal or accelerator
pedal in any way, as this could be a
serious safety hazard.
•
Volvo's floor mats are specially manu-
factured for your vehicle. They must be
properly secured in the attachment
points in the floor to help ensure they
cannot slide and become trapped
under the pedals.
The starter motor will crank until the engine
starts or until overheating protection is trig-
gered.
During normal start conditions, the vehicle's
electric motor will be prioritized and the gaso-
line engine will remain off. This means that
once the start knob is turned clockwise, the
electric motor has been "started" and the vehi-
cle is ready to be driven. The warning and
information symbols in the instrument panel
1 If the vehicle is moving, it is only necessary to turn the start knob clockwise to start the engine.