Volvo S60 Twin Engine 2020, Руководство пользователя

Страница: 304 / 687

||
DRIVER SUPPORT
* Option/accessory. 302
WARNING
When driver support follows another vehi-
cle at speeds over approx. 30 km/h
(20 mph) and changes target vehicle –
from a moving vehicle to a stationary one –
driver support will ignore the stationary
vehicle and instead accelerate to the stored
speed.
•
The driver must then intervene and
apply the brakes.
Automatic standby mode when switching
targets
Driver support disengages and goes into
standby mode if:
•
your vehicle's speed goes under 5 km/h
(3 mph) and driver support cannot deter-
mine if the target vehicle is stationary or if
it is another object, e.g. a speed bump.
•
your vehicle's speed goes under 5 km/h
(3 mph) and the vehicle ahead turns so
that driver support no longer has a vehicle
to follow.
Related information
•
Driver support systems (p. 272)
•
Adaptive Cruise Control
*
(p. 282)
•
Pilot Assist
*
(p. 291)
Adjusting set speed for driver
support
It is possible to adjust set speeds for the
Adaptive Cruise Control
*
and Pilot Assist
*
functions.
: Increases the set speed.
: Reduces the set speed.
Set speed.
–
Change a set speed by pressing the
(1) or
(2) buttons briefly or by pressing
and holding them:
•
Brief press: Each press changes the
speed in +/- 5 km/h (+/- 5 mph) incre-
ments.
•
Press and hold : Release the button
when the set speed indicator (3) has
moved to the desired speed.
NOTE
For vehicles without Adaptive Cruise Con-
trol
*
, speed instead increases by +/- 1km/h
(+/- 1 mph) each time the button is
pressed.
•
The most recently set speed will be
stored.
If speed is increased by depressing the accel-
erator pedal while pressing the
(1) button
on the steering wheel, the vehicle's speed
when the button is pressed will be stored as
the set speed.
Temporarily increasing speed using the accel-
erator pedal, e.g. when passing another vehi-
cle, will not affect the setting. The vehicle will
return to the set speed when the accelerator
pedal is released.