Volvo Penta IPS, Руководство пользователя

Страница: 132 / 140

Lubrication System
Oil capacity including oil filters, approx.:
no engine inclination 45 liters
Oil pressure, hot engine:
Oil pressure during operation 300–550 kPa
Oil pressure during neutral 175 kPa
Oil quality
(1) Sulfur content in fuel, by weight
up to 0,5% 0,5–1,0%
more than 1,0%
(2)
Oil change interval, reached first in operation:
VDS-3 500 hours or 12 months 250 hours or 12 months 125 hours or 12 months
VDS-2
The oil must also comply with at
least one of the following specifi-
cations:
ACEA E7
(3)
Global DHD-1
API CH-4
API CI-4
400 hours or 12 months 200 hours or 12 months 100 hours or 12 months
1) Lowest recommended oil grade. Engine oil with higher oil grade is always possible to use.
2) If sulphur content is more than 1.0 per cent by weight, use oil with TBN over 15.
3) ACEA E7 has replaced ACEA E5. If available ACEA E5 can be used.
NOTICE!
Mineral based oil, either fully or semi-synthetic, can be used on condition that it complies with the quality require-
ments above.
ACEA = Association des Constructeurs Européenne d'Automobiles
API = American Petroleum Institute
Global DHD = Global Diesel Heavy Duty
TBN = Total Base Number
VDS = Volvo Drain Specification
Viscosity
Select the viscosity according to the table.
The temperature values refer to stable ambient tem-
peratures.
* SAE 5W/30 refers to synthetic or semi-synthetic oils.
Technical Data
130 47705796 05-2014 © AB VOLVO PENTA