• From any screen, press repeatedly to scroll through
the brightness levels, if available. This can be helpful
when the brightness is so low you cannot see the
screen.
• Select
from any screen to open to the home screen.
• Select
Options
to open additional settings about that
screen.
• Select
Toolbars
to quickly add an overlay to the
current page.
• Select
to close the menu when finished.
• Press to open additional options, such as adjusting
the backlight.
• Press , and select
Power
>
Turn Off System
, or
hold until the
Turn Off System
bar fills to turn off the
chartplotter, when available.
• Press , and select
Power
>
Sleep Station
to set the
chartplotter to standby mode, when available.
To exit standby mode, select .
• Depending on the features of your chartplotter, not all
feature buttons are visible are on the home screen.
Swipe right or left to view the additional feature buttons.
• On some menu buttons, select the button
to enable
the option.
A green light on an option indicates the option is
enabled
.
• When available, select
to open the menu.
Locking and Unlocking the Touchscreen
You can lock the touchscreen to prevent inadvertent
screen touches.
1
Select >
Lock Touchscreen
to lock the screen.
2
Select to unlock the screen.
Accessing Owner's Manuals on the
Chartplotter
1
Select
Info
>
Owner's Manual
.
2
Select a manual.
TIP:
You can access supplemental Volvo Penta
manuals here.
3
Select
Open
.
Downloading the Manuals from the Web
You can get the latest owner's manual and translations
of manuals from the Volvo Penta website. The owner's
manual includes instructions for using device features and
accessing regulatory information.
1
Go to
garmin.com/manuals/VolvoGlassCockpitB7-B9
2
Download the manual.
Garmin Support Center
for help and information, such
as product manuals, frequently asked questions, videos,
software updates, and customer support.
Inserting Memory Cards
This device supports up to a 32 GB microSD memory
card, formatted to FAT32 with speed class 4 or higher.
Use of an 8 GB or higher memory card with speed class
10 is recommended. An 8 GB memory card is included.
1
Open the weather cap
on the back of the
chartplotter.
2
Insert the memory card
.
3
Press the card in until it clicks.
4
Press the weather cap firmly shut to prevent corrosion.
Acquiring GPS Satellite Signals
The device may need a clear view of the sky to acquire
satellite signals. The time and date are set automatically
based on the GPS position.
1
Turn on the device.
2
Wait while the device locates satellites.
It may take 30 to 60 seconds to acquire satellite
signals.
To view the GPS satellite signal strength, select
Options
>
Settings
>
System
>
GPS
.
If the device loses satellite signals, a flashing question
mark appears over on the chart.
For more information about GPS, go to
. For help acquiring satellite signals, see
device will not acquire GPS signals
Selecting the GPS Source
You can select your preferred source for GPS data, if you
have more than one GPS source.
1
Select
Options
>
Settings
>
System
>
GPS
>
Source
.
2
Select the source for GPS data.
Customizing the Chartplotter
Home Screen
The home screen is an overlay that provides access to
all of the features in the chartplotter. The features are
dependent on the accessories you have connected to
Customizing the Chartplotter
3
