DVR-4 4-Channel digital Recorder
6
window will appear, which is illustrated as below. You change a recording schedule during a day
(24-hour period) using this option.
0-24 instand of 24 hours of a day, each hour can be setuped to one of three states: T (time),
S (sensor), - (normal).
(T) this period is time scheduled, in time scheduled state (push the schedule button), this
period will record automatically.
(S) this period is alarm scheduled, in alarm scheduled state (push the alarm button), this
period will record automatically when there is an alarm input.
(-) this period will not record unless you push the record button.
Push leftward button or rightward button to move the cursor, push add or decrease button to
change the value.
9. Hard drive setup
When the cursor moves to HARD DRIVE SETUP, then push enter button, the hard drive
setup window will appear, which is illustrated as below. Push upward or downward button to
move the cursor, push add or decrease button to change the value, push enter button to select.
OVERWRITE ENABLED: If you choose YES, recording continues and overwrite previous
recording when hard disk drive space is full. If you choose NO, the recording session stops when
all hard disk drive is full for recording.
MASTER HDD SIZE: It shows the size of the primary hard disk drive is full for recording.
MASTER HDD USED: It shows the space used on the first hard disk drive for recording.
MASTER HDD FORMAT: If you format the hard drive, it will erase all the data recorded on
the first hard drive.
SLAVE HDD SIZE: It shows the size of the secondary hard disk drive is full for recording.
SLAVE HDD USED: It shows the space used on the secondary hard disk drive for recording.
SLAVE HDD FORMAT: If you format the hard drive, it will erase all the data recorded on the
secondary hard drive.
N/A means there is no secondary hard drive.
