DVR-4 4-Channel digital Recorder
17
U
U
s
s
e
e
r
r
g
g
u
u
i
i
d
d
e
e
l
l
i
i
n
n
e
e
1.Start the machine
Before starting the machine, please make sure all the items in the “
Security Notice
” at
the beginning of this manual are fulfilled.
Before starting the machine, please check the system connection, input and output
equipment connection, and power connection.
Please insure the video-recorder’s input video (NTSC/PAL) and the monitor (NTSC/PAL)
meet the demands.
Start exterior equipment after checking over.
Insert the removable hard disk case to the end, and lock it up (turn right the hard disk
lock); Push the power button, the machine start to work.
If the machine stops abnormally whil
e
recording last time, then after restarting, the
machine will ask you to restore the record by pushing enter button or abort by pushing
menu button, hard disk can automatically clear up if you push enter button and then resumes
to the status before power-off, and continue the interrupted recording. The time for hard
disk resetting and clearing-up depends on the recorded information on the hard disk, which
varies from ten seconds to a few minutes. So please wait patiently. If the machine stops
abnormally during playing last time, it does not need automatic recovery function.
2.Turn off the machine
Normally turn off the machine when the system shutdown, which means do not to turn
off the machine while playing or system setting up, especially not to turn off the machine
while recording (otherwise the system will start automatic recovery function when turn on
next time).
Push recording button to stop recording or push playing button to stop playing or exit
from system setup menu, then turn off the power.
It is best to turn off the video-recorder power first, and then turn off the power of external
equipments.
If do not use the video recorder for a long time, should pull out the power line from the
electrical outlet.
3.Ordinary recording
Connect the power to all related equipments; ensure that there is video input.
Push display button to check spare space of the hard disk, if there is no much space,