4.Advanced User Guidebook
85
cursors active. Select
Line
in the bottom menu as
a
or
b
, turn the
M
knob to
move it.
7.
In the bottom cursor menu, you can select
Window
as
Main
to make the
cursors shown in the main window.
How to Use Autoscale
This is a very useful function for first time users to carry out a simple and quick test
on the input signal. The function is applied to follow-up signals automatically even if
the signals change at any time. Autoscale enables the instrument to set up trigger
mode, voltage division and time scale automatically according to the type, amplitude
and frequency of the signals.
The menu is as follows:
Function Menu
Setting
Instruction
Autoscale
ON
OFF
Turn on
Autoscale.
Turn off
Autoscale.
Mode
Follow-up and adjust both vertical and horizontal
settings.
Follow-up and only adjust horizontal scale.
Follow-up and only adjust vertical scale.
Wave
Show Multi-period waveforms.
Only show one or two periods.
To measure the signal using autoscale, you can do as the follows:
1.
Push the
Autoscale
button, the function menu will appear.
2.
In the bottom menu, select
ON
in the
Autoscale
menu item.
3.
In the bottom menu, Select
Mode
. In the right menu, select
.
4.
In the bottom menu, Select
Wave
. In the right menu, select
.
