![background image](http://html1.mh-extra.com/html/voltcraft/2250943/2250943_operating-instructions-manual_1047069028.webp)
28
Problem
Cause
Solution
Moving the camera head quicky
causes the image to trail
Video recording is in
progress.
Recording uses extra system resources. Stop
recording or move the camera head slower.
“Edit text” → “Display” → “ON”
but no message is shown on the
screen.
Messages can only
show in live mode
Message will be visible in captured photos, re-
corded videos and during recording.
Recorded images have severe
lagging.
MicroSD card not
formatted correctly
Format the card. See “b) Get storage ready” on
page 23” for further information.
Image freezes
Processor locks due to
abnormal operation.
Press the reset button. See “f) Reset button” on
page 27 for further information.
Zoom adjustments are not
shown in captured photos or
recorded images.
Photos and video can
only save 1x zoom
Use third party software to enhance the image.
Cannot charge battery
Defective battery
Contact our technical support service or other
technical personnel.
14. Care and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
• Disconnect the product from any peripherals and/or mains before each cleaning.
•
Clean the product with a dry, fibre-free cloth. Moisten the cloth if needed.
•
Use the included cleaning rods to clean difficult to reach places.
15. Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of
its service life, dispose of the product in accordance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.