![background image](http://html1.mh-extra.com/html/volt/vpl-1012-4-bbz/vpl-1012-4-bbz_installation-instructions-manual_1046324004.webp)
INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
Remove Fixture Hat and Inner Shield
2
Remove the finial and the hat from the
inner shield. Pull the inner shade off of
the fixture body to expose the socket.
Hat
Finial
Fixture Body
Inner Shield
Install Stake
1
Determine the desired location for
mounting the fixture. Hammer the stake
into the ground until flange of stake is flush
to grade. To avoid damage to the stake,
place a board on top of the stake while
hammering.
NOTE: If the ground is hard and the stake
is difficult to install, make a crosscut in the
ground using a flat shovel.
Board
Stake
Soil
Ground
- 4 -
VOLT
®
Brass Regal LED Path & Area Light
VPL-1012-4-BBZ