![background image](http://html.mh-extra.com/html/volt/vhs-6720-x-bbz-r1/vhs-6720-x-bbz-r1_installation-instructions-manual_1046315005.webp)
[email protected] • 813.978.3700
Install Fixture to Mounting Surface
4
- 5 -
Wire Connection
5
Place the fixture body onto
the desired location. Mark four
points on the mounting surface
using the holes of the mount
as a guide. Set the fixture
aside and drill the proper holes
where you placed the marks
then insert the wall anchors
into the drilled holes.
Place the fixture onto the
surface and secure with screws
using a screwdriver.
Fixture Body
Wall Anchor
Screw
Strip both leads from the luminaire pigtail. Using two wire
connectors (sold separately), connect the leads from the
luminaire to the main supply cable leads.
Wire Connectors
Luminaire Wires
Main Supply Cable