Package Contents
Parts Required
Important: Please Read Before Installation
INSTALLATION INSTRUCTIONS
A. (1) Fixture body
A.
(1) Mounting Accessory
B.
(1) Coupler
!
w w w . v o l t l i g h t i n g . c o m
[email protected] • 813.978.3700
Important Safety Instructions
!
- 2 -
- 3 -
VOLT
®
12V Brass Flood Light with Yoke Mount
VFL-450X-BBZ
C.
(1) Hex Nut
Product Dimensions
2.92”
4.45”
5.35”
6.65”
4.48”
5.81”
1.98”
4”
3.43”
1.1”
2.29”
2.41”
1.04”
2.28”
1.15”
4.5”
7.48”
7.12”
4.91”
3.55”
4.84”
6.3”
5.77”
5.94”
1.18”
1.18”
1.18”
0.47”
0.63”
0.55”
12VAC 12W
12VAC 17W & 22W
12VAC 27W
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situation.
1. Make sure that the power is turned OFF before installing or servicing this
luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)
or more from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply
(transformer) rated maximum of 300 watts (25 AMPS) at 12V AC.
4. Wiring connections must be made with wire connectors that are suitable
for outdoor use.
5.
Position the low voltage wire and wire connector so that it is located
within 6 inches (15.2 cm) from a building structure, a luminaire or
fitting.
6. The main low voltage cable is intended for shallow burial - less than 6
inches (152 mm).
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before replacing lamp.
2. Lamp gets HOT quickly! Contact only switch/plug when turning on.
3. Do not touch the hot lens, guard or enclosure.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may
damage lamp.
6. Do not operate the luminaire fitting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
