VOLT
®
Line Voltage Landscape Lighting
VOLT
®
Max All-Star 120V Lamp-Ready Spotlight
INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
- 2 -
Important: Please Read Before Installation
Important Safety Instructions
1. This LED Floodlight uses the latest in solid state lighting technology for
long life, low maintenance, and high efficiency.
2. An internal power-factor-corrected switch mode supply allows this
fixture to be used from any nominal 100V-277V, 60Hz AC supply without
any variation in light output.
3. Suitable for use in:
a. Ambient Temperatures of: -20~+40°C (-4~+104°F)
a. Wet Locations
Note: Save these instructions for future reference.
To avoid the risk of fire, explosion, or electric shock, this product should
be installed, inspected, and maintained by a qualified electrician only, in
accordance with all applicable electrical codes.
To avoid electric shock:
1. Be certain electrical power is OFF before and during installation and
maintenance.
2. Luminaire must be connected to a wiring system with an equipment-
grounding conductor.
To avoid explosion:
1. Make sure the supply voltage is the same as the rated luminaire voltage.
2. Do not install where the marked operating temperatures exceed the
ignition temperature of the hazardous atmosphere.
3. Do not operate in ambient temperatures above those indicated on the
luminaire.
For supply connections use wire rated for at least 90°C (194°F)
Warning: these luminaire should ONLY be installed by a qualified electrician.
!
!
