FIGURE A
FIGURE B
Ground Stake
Stem
GU4 Bulb
Socket
Hat
REFER TO FIGURE A WITH
INSTRUCTIONS 1-3:
STEP 1: Remove the finial, waterproof
washer, hat and shield from the stem.
STEP 2: Insert the GU4 Bulb into the
socket.
STEP 3: Install the shield, hat,
waterproof washer and finial back onto
the stem.
STEP 4: Make a wire connection with the
run line by splitting the two ends of each
wire. Then connect both left side ends
of each wire and both right side ends.
These do not have polarity, so just don’t
connect both ends of the same wire
together.
See Figure B for details.
STEP 5: Turn on the transformer to
ensure fixture is functioning properly.
STEP 6: Enjoy your new outdoor lighting.
Installation Instructions
Right Side
Right Side
Left Side
Left Side
Run Wire
Fixture Wire
Wire Connector
Wire Connector
Waterproof
Washer
Finial
Shield
