28
3.3 Notice of using the tools
：
•
Don’t use the tool if the switch doesn’t work properly
. Tool should be repaired if the switch
doesn’t
work.
•
Disconnect the battery from tool or power source before adjusting, repair, replace or storage the
tool. This will avoid injuries due to unexpected start of the tool.
•
Store the tool away from
the children, don’t put tool to non
-training person operate.
•
Maintain tools. Always check tool, moving parts, any damage parts are all can cause injury, the
correct maintenance of the tool can avoid injury.
•
Read manual before using the tool, select suitable tools and right accessories to avoid injury.
3.4 Notice using cordless tool
：
•
Make sure the switch and battery insertion hole are in perfect working order before connecting the
battery.
•
Use only the charger specified by the manufacturer. Use of other charger can damage the battery
and cause risk of fire.
•
The tool is only designed for original battery. Using other battery to match the tool can cause
damage and risk of injuries.
•
Battery should be stored away from metal parts, like clip, coin, key, nail, screw or other small metal
parts. Short circuit the battery will cause fire.
•
Inappropriate usage will cause leakage of liquid. If your body is splashed by the liquid, please flush
by clean water. Must see a doctor if liquid touches eyes. Liquid of battery will canker or burn.
3.5
Personal safety
：
•
Keep alert, watch what you are doing and use common sense while shifting the power tool. Do not
operate the power tool when you are tired, or under the influence of drugs, alcohol or medication.
A moment of inattention when operating the power tool may cause serious personal injury.
•
Use personal protective equipment. Always wear goggles. Safety equipment, such as dust mask,
anti-skid safety shoes, hard hat, hearing protection and other devices used for appropriate
conditions will reduce personal injury.
•
Avoid accidental start. Carrying power tool with your finger on the switch or plugging in power tool
that have the switch ON, may cause danger.
•
Remove all adjustment keys or wrenches before the power tool is switched ON. A wrench or key
left attached to a rotating part of the power tool may cause personal injury.
•
Do not overreach. Keep proper footing and balance at all time. This enables better control of the
power tool in unexpected situations.
•
Dress properly. Do not wear loose clothing or wear jewelry. Keep clothes, gloves and hair away
from moving parts, because of loose clothing, jewellery or long hair may be caught in moving parts.
4.
Special safety instruction
4.1
Special safety instructions of the tying machine
•
Don’t remov
e the front cover during the tool operation. Keep any part of your body at a minimum
distance of 5 cm from the tying mouth during tool operation. Any negligence during the operation
of the tying machine may cause personal injury.
