42.VW.2210.2554_BA_V02_EN
VAS 6923A
14
EN | Operation
Ensure that the miniature circuit breakers and residual-current device comply with the
product specifications and the latest engineering standards (see the “Technical data”
section).
You cannot safely operate the product on this power supply until all the checks have been
performed successfully.
Startup
This section provides you with information about starting up and operating the product.
CAUTION
Tripping hazard!
Tripping over exposed cables or the housing may result in physical injury!
•
Warn other persons about exposed cables and the housing!
•
Never block traffic or escape routes!
•
Position the vehicle next to the power supply!
•
Ensure that persons do not enter the area where the product is being used without
due care!
•
Take special care when entering the area where the product is being used!
Follow the general safety instructions.
Insert the three-phase plug all the way into the three-phase socket. Observe the coding
on the plug!
Following a successful connection to the power supply, the status LED flashes as
follows:
a.
During the self-test, the status LED flashes blue once and then white. The number
of white flashes indicates the product software version.
b.
The status LED then flashes or lights up blue, depending on the power supply (see
the “Status display” section).
You can now begin the charging process.
